FREE SHIPPING on most orders over $500

Mon-Fri: 6:30am to 5pm PDT

(818) 753-8888

Lutron Vive FCJS-010-EM

Emergency rated 0-10 V control module

Please refer to the Specifications to determine what items are included since sometimes the image shows more or less items. If you are not sure, please contact us and our customer service will be glad to help.

Description

Features

Occupancy Sensor:
• Passive infrared motion detection with exclusive Lutron XCT Technology for major and minor motion detection.
• 360˚ field-of-view.
• Up to 300 ft2 (27.9 m2  major motion coverage and 150 ft2 (13.9 m2 ) minor motion coverage.
Daylight Sensor:
• Daylight sensor has simple, automatic calibration out-of-the-box.
• Designed to give a linear response to changes in perceived light level.
• Detects ambient light level changes from 0 to 1600 lx (0 to 150 fc).
• Daylight compensation through Lutron reliable closed
loop proportional control. For more information, see www.lutron.com/TechnicalDocumentLibrary/daylighting_white-paper.pdf

Specifications

PowPak Fixture Sensor

Regulatory Approvals
• FC-SENSOR, FC-VSENSOR:
– cULus Listed
• Complies with requirements for use in other spaces used for environmental air (plenums) per NECR 2014 300.22(C)(3)
Power/Load
• Operating voltage: 12 V-
• Operating current: 25 mA
• IEC SELV / NECR Class 2
Environmental
• Ambient operating temperature: 32 °F to 104 °F(0 °C to 40 °C), 0%–90% humidity, non-condensing; indoor use only
Warranty
• 5 Year Limited Warranty. For additional Warranty information, please visit: www.lutron.com/TechnicalDocumentLibrary/Sensor_Warranty.pdf
Wiring
• Sensor wires are IEC SELV / NECR Class 2 rated Settings
• Occupancy sensor timeout (fixture sensor): 15 minutes
• Utilizes a green laser pointer (by others, not a Lutron product) to associate Pico remote controls and Radio Powr Savr sensors to PowPak wireless fixture controls via RF. See Lutron Application Note #407 (P/N 048407 at www.lutron.com) for more information.
– Green laser specifications:
∙ Wave output: constant
∙ Wavelength: 532 nm
∙ Output power: 5 mW maximum
• 2-wire connection between a PowPak fixture sensor and a PowPak wireless fixture control
– The wires are interchangeable to eliminate miswiring
– The sensor comes with 2 ft (0.6 m) of wires
– If hanging pendant fixtures, the maximum wire length between fixture sensor and fixture control is 12 ft (3.7 m). Sensor should be mounted no more than 2 ft (0.6 m) from the fixture.

Be the first to review “Lutron Vive FCJS-010-EM”

*

ViveMT PowPak® Fixture Controls

Download