FREE SHIPPING on most orders over $500

Mon-Fri: 6:30am to 5pm PDT

(818) 753-8888

RMJS-8TN-DV-B Dimming Module 0-10V – Lutron Vive

Vive PowPak 120/277V, 8A, 0-10V Dimming Module (class 1 installation)




Please refer to the Specifications to determine what items are included since sometimes the image shows more or less items. If you are not sure, please contact us and our customer service will be glad to help.


RMJS-8TN-DV-B – Lutron Vive

PowPak Dimming Module with 0-10V control with 0-10V wires 120 V/277 V

Features RMJS-8TN-DV-B

  • Controls up to 60 mA of 0 –10 V- controlled fixtures together
  • New model available for use with emergency lighting 1
  • Switches up to 8 A total
  • 0 –10 V- control link automatically sources or sinks to the third party fixtures
  • Configurable high- and low-end trim
  • Various operating voltages available; refer to model number chart on the next page for details on voltage requirements
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Utilizes Lutron Clear Connect RF Technology; refer to model number chart on the next page for frequency band data
  • Mounts to a US-style junction box through a standardsize knockout

Specifications RMJS-8TN-DV-B

  • UL® Listed
  • UL 924 Listed (RMJS-8T-DV-B-EM only)
  • FCC approved. Complies with the limits for a Class B device, pursuant to Part 15 of the FCC rules
  • Complies with requirements for use in other spaces used for environmental air (plenums) per NEC® 2014 300.22(C)(3)
  • Listed in accordance to CAN/ULC S102.2-2010 with a Flame Spread Rating of 0 and a Smoke Developed Classification of 40, with a minimum spacing of 6 ft (1.83 m) off center
  • cUL and IC (Canada) (RMJS- only)
  • COFETEL (Mexico) (RMJS- only)
  • NOM (Mexico) (RMJS- only)


  • Operating voltage

120 / 277 V~ 50 / 60 Hz

Output Ratings

  • Switch rating of 8 A. Rated for resistive or capacitive loads as defined by IEC/EN 60669-2-1
  • 0 –10 V- control link for 60 mA maximum output, source or sink automatically configures

Other Power Specifications

  • Standby power:

– 240–277 V~ 610 mW – 120 V~ 550 mW

  • BTU / hour when fully loaded: 9
  • Works with all ballasts and drivers that provide a current source that is compliant to IEC 60629 Annex E.2, and whose inrush current does not exceed NEMA410 standards for electronic ballast/driver

System Communication

  • Operates using Clear Connect RF Technology for reliable wireless communication; refer to model number chart on page 1 for frequency band details
  • RF range is 30 ft (9 m)
  • Wireless sensors and controls must be located within 60 ft (18 m) line of sight, or 30 ft (9 m), through walls, of the associated control module. The 60 ft (18 m) range is not reduced by a ceiling tile obstruction.


  • Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
  • 0% to 90% humidity, non-condensing
  • For indoor use only
  • All drivers and ballasts used with Vive wireless controls must comply with the limits for a Class A device pursuant to Part 15 of the FCC Rules

0 –10 V- Control Link

  • Communicates with up to 60 mA of fixtures
  • Control link is IEC SELV/NEC® Class 2
  • 0 –10 V- control can be installed using NEC® Class 1 or Class 2 wiring methods. Alternately, it can be wired to basic or double-insulated devices
  • Always consult local wiring codes
  • Compatible with ANSI E1.3 2001 (R2006), IEC 60929 Annex E

Emergency Model Sequence of Operation With a Vive hub:

  • Normal mode: The RMJS-8T-DV-B-EM can dim loads as normal and respond to local button presses, Pico wireless controls, and occupancy / daylight sensors.
  • If the emergency PowPak loses power for greater than 250 mS, it will automatically go into emergency mode (full output, relay closed), when emergency power is restored to the PowPak, for as long as the Vive hub has no power. All local buttons, Pico wireless controls and occupancy /daylight sensors will not respond. The emergency light level of the emergency PowPak can be configured using the Vive hub.
  • When normal power is restored to the Vive hub and emergency PowPak, the emergency PowPak will return to the previous light level in most cases within 3 minutes, but guaranteed within 10 minutes of normal power being restored. It will again accept local button control, input from Pico wireless controls, and occupancy / daylight sensors.

RMJS-8TN-DV-B – Check all Lutron Vive Products

Additional information




Be the first to review “RMJS-8TN-DV-B Dimming Module 0-10V - Lutron Vive”